Levelling applications
Contents |
[edit] Introduction
In surveying, levelling is a process of determining the height of one point (or level) relative to another. It is used in surveying to establish the elevation of a point relative to a datum or to establish a point at a given elevation relative to a datum. Several different surveying instruments can be used for levelling, all of which are loosely referred to as ‘levels’, for example, a spirit level.
Different types of levelling include:
[edit] Fly levelling
Fly levelling is a quick way of establishing a new temporary benchmark. The benchmark will help with the calculation of reduced levels. A temporary benchmark is usually used on smaller construction projects. On larger projects, levels will be linked to the Ordnance Survey Benchmarks.
Fly levelling is used for transferring levels and the only readings required are the backsight and foresight recordings. The intermediate sight readings are not used but the distance between readings should not exceed 50m. Fly levelling can be helpful when the benchmark is very far from the work station. In such a case, a temporary benchmark is located at the work station which is based on the original benchmark. It is not highly precise and is used for determining approximate levels only.
[edit] Whole circle bearings
Whole circle bearings refer to angles measured in a clockwise direction from north to establish levels. In whole circle bearing, the value of the bearing will vary from 0° to 360°. The angle between the north line to the survey line must be measured to establish the whole circle bearing. Co-ordinates are used in the calculations for whole circle bearings. The seconds, minutes and degrees of known points are used and deducted from each other to calculate the unknown angles’ co-ordinates.
[edit] Traverse types
Traverse levelling is the measure of the lengths and directions of a series of straight lines connecting a series of points. The straight lines are called traverse legs, and points are called a traverse station.
There are different types of traverse levelling applications:
- Open traverse - Has a different start and endpoint. It begins at a point of known control and ends at a station whose relative position is known only by computations.
- Closed traverse - Has the same start and endpoint.
- Directional travers - Extends directional control only. This type of traverse can either be open or closed.
See also: Levelling in surveying.
[edit] Related articles on Designing Buildings Wiki
- Building survey.
- Condition survey.
- How to layout a building.
- Land surveying.
- Laser scanning.
- Level.
- Levelling in surveying.
- Measurement of existing buildings.
- Robotic total station.
- Site surveys.
- Surveying instruments.
- Surveyor.
- Verticality.
[edit] External references
BTEC National Construction Student Book - Pearson
Featured articles and news
Global BACS Market: analytics and optimisation
A BSRIA glance at building automation and control systems.
What it is and how to use it.
Investors in People: CIOB achieves gold
Reflecting a commitment to employees and members.
Scratching beneath the surface; a guide to selection.
ECA 2024 Apprentice of the Year Award
Entries open for submission until May 31.
UK gov apprenticeship funding from April 2024
Brief summary the policy paper updated in March.
For the World Autism Awareness Month of April.
70+ experts appointed to public sector fire safety framework
The Fire Safety (FS2) Framework from LHC Procurement.
Project and programme management codes of practice
CIOB publications for built environment professionals.
The ECA Industry Awards 2024 now open !
Recognising the best in the electrotechnical industry.
Sustainable development concepts decade by decade.
The regenerative structural engineer
A call for design that will repair the natural world.
Buildings that mimic the restorative aspects found in nature.
CIAT publishes Principal Designer Competency Framework
For those considering applying for registration as a PD.
Introducing or next Guest Editor Arun Baybars
Practising architect and design panel review member.